Tricky-Dicky's latest activity

Well, I got to do my first match today after sealing up the hole in the breach block. Looking fairly promising that I’d like to tighten...

So you're in the UK and you have FAC, but you will need to put that particular rifle on your ticket in order to legally modify for FAC...

It looks like you're trying to set up a sub 12 gun for FAC, so there are other factors involved that the manufactures use to limit the...

Did you monitor your shots with a chrono? also, did you say you used both the STD stripper and the whisper insert with your printed...

Are all the pins/screws that operate the cocking leaver in place? And is there anything preventing the pellet probe being seated?

So would I, however having already looked and not found anything IE o ring damage and I have already replaced some of the O rings with...

My Epoch seems to have taken a dive since I had the odd puff of air from the HP reg when adjusting, the power is definitely down a bit...

Previously I had a descending shot string of 15-20 fps over 30 shots.

I was never particularly happy with my ES or SD numbers with my Epoch, until I replaced both regs recently. Ran a shot string and shot...

Interesting, maybe a couple of new regs are on the cards as well. What was the ES and DS previous to fitting the new regs?

WOW talk about thread resurrection! On the subject of Robert Lane regs I will always buy them over Huma had more trouble with Huma and...

My understanding is that the tiny hole in the poppet valve is the feedback pressure/volume for the closing of the spool valve so the...

From May 0f 2013 ... ( Quoted ) from an early tuning post over 2 years ago. * BTW have sense in .22 cal opened vent a tad more and...

So, you're thinking that a too small bleed hole is a cause of increased dwell? Not sure on the transfer path as we both had the same...

Glad the plug sorted your leak fella, was the 8fps spread an improvement on before? As you know, I also tested my sub 12 .177 Epoch in...