tommyb's latest activity

OP, did not mean to hijack. Scott got me thinking with his post and I emailed him now and took it off line. Thanks for your...

HPA is a very serious consideration. Small story. At the range one day, got distracted talking to a "chatty Kathy' while filling my...

The barrel butts up against the thimble, which is flush against the breech face. There is a set screw on the thimble which when...

John, I see you do not have many posts on AGN since 2020 when you joined. As you can see, we like to chide each other from time to time...

Thanks Alan Good idea, especially if it were a smaller portable or GX CS4-i compressor. It would have to be a pretty big cooler for an...

Scott - a related troubleshooting question for you. I purchased a RAW TM1000X .177 which I use exclusively for 30 and 40Y Target...

Joe, have not done that yet. Can you PM me so I can call you when you get a chance. I need to understand how to do this properly and...

Thanks Ed.

Well, I told you I would report back if I had issues. Noticed in the last few range outings, my EaZy fill trigger is leaking air from...

@Uglyjohn That's good to read. Please tell him that I asked about him and I enjoyed his presence when he was active on the forums.

Let’s just use the 200-18X 30Y Challenge card for the next Leaderboard. Maybe for next year we test the waters on any changes.

Thanks. In reading many of the responses in this post, I’m sensing that one can use either 1) filtered or distilled water with an...

I have two compressors that use a closed circulating system with a radiator - although my comment could apply to an open system using a...

Geez Luis, if you lived 5/10 minutes from my house I could drop off my GW 9L and Tuxing 6.8L and pay you to fill them from 3000 psi from...

Joe, I. have a TM1000x with the thimble, which is flush against the chamber, as it should be. It’s definitely not bad pellets, or me...