Recent content by Tom Strong

Last post was over a year ago; nobody is working with the H&N HP 30gr 22. It is coated with a something plastic like perhaps like some 22LR rounds. It is a heavier slug. FX recommends the heavy barrel liner for .22 projectiles over 23gr. I have the 700mm barrel, the twist is 1:16 according to...

Here are before and after shots of the block/level. _141001 is what I had after installing it. _111330 is after I turned the linkage over. It you look at it closely the linkage holes are offset. Sorry the second is not so clear but you can see the result.

I will.

Based on no response and contacting ST plus doing some head scratching I found the problem. During installation as I took the cocking level off it fell apart; the linkage pin dropped and it fell off. I remembered this after ST said they'd not seem anything like this before. Today I flipped...

It may have been based on your tune. I would guess a lower pressure longer surge might get the pellet out the barrel and dump air behind it. Just a guess...

From what I've read [here] the intent of the pellet port is to make a gun set up to shoot slugs to go back and shoot pellets without tearing down major aspects of the tune, which for the MK2 is a pain. I assume this would be a non-ideal setup for it appears is costs you shots per fill but I'm...

Any body else have problems with the Saber Tactical cocking block? I've put it on a MK2 and it's not right.

I was very pleased to find this post. I've had my Impact MK2 700mm .25 cal for a couple of years. This year I decided to do a deep dive into tuning if. This forum, AEAC and others have been very informative. I'd never given the S&P ports much thought. The other day I discovered I was using the...