thumper's latest activity
thumper reacted to cavedweller's post in the thread N/A What is the most accurate.177 PCP at 100yds all opinions welcome??? with
Like. It’s odd that you want superior accuracy and don’t expect a superior price tag attached to it. You get what pay for, but again, you are...- thumper reacted to Sqwirl57's post in the thread Tuning Who else enjoys breaking in their springers instead of tuning? with Like. The LGU and LGV were about as close to tuned from the box as I've encountered. Great guns.
- thumper replied to the thread Tuning Who else enjoys breaking in their springers instead of tuning?."However I’ve never shot a tuned air rifle so I can’t really cant compare" And that's the difference.
- thumper reacted to Toxylon's post in the thread Tuning Who else enjoys breaking in their springers instead of tuning? with Like. "Just break them in" doesn't work for me, if only for the fact that every German springer I've bought to date has dieseled into infinity...
- thumper replied to the thread HW/Weihrauch Removing bolt on R9 receiver.This is what I've used for ages: https://shop.snapon.com/product/Marine-Plug-Screwdrivers/Large-Marine-Plug-Screwdriver-(Green)/SGD155CG
- thumper replied to the thread HW/Weihrauch Removing bolt on R9 receiver.I guess they could ask you: Why did you strip it? They use flat heads because they will hold a decent amount of torque, and they are...
- thumper reacted to Vana2's post in the thread Whats the one thing on your favorite gun you wish was on all guns..... with Like. Replace all the flimsy plastic dial-a-problem mags with the simple no-moving-parts solid metal mag like on the HW100/HW110/HW44.
- thumper replied to the thread Whats the one thing on your favorite gun you wish was on all guns......Trigger from an HW100. Seriously, it's an incredible trigger and an actual REAL two stage. Magazine system (complete with...
- thumper reacted to Sqwirl57's post in the thread Tuning Who else enjoys breaking in their springers instead of tuning? with Like. It usually only takes an hour to make and install guides and do a clean up and relube job. Id rather not waste the pellets. I do usually...
- thumper replied to the thread What got you started?.I had airguns as a kid, like most all country kids did. I just never grew out of them. I had access to a .22LR from an early age, but...
- The Hoppes #9 debate is a false flag, it's just fine on o-rings and airgun bores. I use Balistol a lot but when stubborn leading is...
- No. The grease is mostly intended as a lubricant to prevent abrasion or damage to the rubber as it contacts the mating surfaces during...
- thumper reacted to Sqwirl57's post in the thread N/A Lubrication of the compression chamber without dieseling in the spring gun, yes of course. with Like. I just use moly paste and don't go nuts with it. As long as the seal is good and the pellets are consistent it works great and...
- thumper replied to the thread HW/Weihrauch Spring piston guns, shooting tehcniques.I just shoot my spring guns without a whole lot of thought other than not putting them on bags front and rear. If they take more...
- thumper replied to the thread HW/Weihrauch Spring piston guns, shooting tehcniques.How do you know it's special? You've only had the one. Maybe they are all like that? :unsure: You should go to a field target match...
