Texas Iggie's latest activity

Well I took the receiver apart (upper & lower) so now I can work on it It looks pretty straight forward. I tend to look at things and...

i weight sorted a 300ct tin of AEA 29.5 gr pellets, i ended up separately them in 29.5 and 29.6, the 6 off weight pellets i found were...

Those are some beautiful parts you have there. I wish I had the skills and tooling to make my own parts. If I could I’d be building my...

@Airgun-Revisions sounds good! I'll give you a call next week to discuss further. @Texas Iggie ill be in touch with you if i cant...

Yes this is what I’m looking for. The same thing happened to a customers gun that was sent to me years ago. It’s definitely not this...

That sure is what caused the damage. If you cant get a replacement lower from him then send me a message and I can make the lower for...

There is a good chance the O-ring got cut at the port when the valve was installed and is the first thing I would replace if you want to...

Show a pic of the side of the brass valve that made the damage. Just below the TP. I’ve seen this happen before and it’s usually due to...

If you don't mind me asking what is the replacement cost for the lower?

I have repaired stuff like this before and with damage on the wall where the valve goes definitely make your options limited. It is...

If you are trying to avoid a lot charge to get the part anodized I would recommend some type of Cerakote. Cerakote looks great and it...

Many local dealers do or have someone that does cerakoting and it’s pretty cheap nowadays. It’s fairly easy to do and do a good job for...

Nice looking part. That is where 3D printing is great so you can get a quick look and hold the real product.

As so many have already stated. 3d printing has its place in manufacturing. Ive been testing so many different designs that I couldn't...

I do have Quidi X-max printer and Creality resin printers. Both work great.