Temesvar's latest activity

Just to reiterate, you cannot go skirtless in a break barrel, unless you are going to incorporate a secondary sliding compression tube...

Am retired machinist, and have access to a machine shop. Although, wish they had a better lathe...:) Am playing with my guns just as a...

With all due respect , Have you worked on springers , maching parts. ? This is doable but to the very experienced mechanic. Otherwise...

Am not sure if worth the trouble. Can make the piston as light as possible, by leaving just enough material to guide the latch pin...

That is what am looking for. Don't know how it is called, but yes, a rod with round hook. That i can deal with. Just wonder about the...

97. You can, but the latch pin has to be round. That was my question!

The skirt is to guide the rod to latch. Without that guide, the latch will not line up. That is my question: will the trigger work?

The long skirt of the piston has the sole role of guiding the latch. Without, the latch hook has to be round. Was wondering if the...

Anybody that has a skirtless piston, and the latch rod is rounded, will the factory trigger still work?

All worked out. Like the way it shoots with spring. The spring guide and top hat are guided as well. In the pic. the guides are steel...

Finally got the spring to replace the ram on my Gamo Bonne Collector. Ordered a strong spring with .152 Dia. coils. Am happy with the...

HW97k. 50 yards.

Absolutely! Question was why get a 25 mm piston and compression chamber when you can just make a 26 mm piston lighter. 1 mm smaller...

You can buy or make a 26 mm piston lighter. What speed do you get with a 25mm piston?

Not fact, but something along these lines..... Stage 1- Smooth out any poorly machined/ unfinished surfaces on piston skirt, cocking...