steve-l's latest activity

HUBEN Uses two valves. One to open air flow, one to close it. When the gun is first pressurized air flows through the closing valve...

Most of these adapters add too much height to the sight above the barrel requiring hold over and under sighting. These add very little...

Hi. I found this 11 mm to 20 mm base adapter on Amazon. It is low profile and just snap onto your scope ring base and snug it down. It...

Donny, In most cases moderators mount to the shroud not directly to the gun barrel with a proper register guaranteeing correct barrel...

The POI shift you are experiencing has more to do with the gun's recoil rather than moderator interference to the pellet's flight path...

In order to create a barrel to projectile seal, all projectiles (bullets, slugs or pellets) are always larger than the barrel ID. This...

Dan, just a suggestion, every gun has a personality and is usually unique in its own way. I think you should just use it for a year or...

Consider yourself lucky. It is the chamfer that acts like the case flange on powder burning revolver cartridges.

You may note that the pellet skirt must be larger in diameter than the pellet head. It is the skirt that is supposed to seat in the...

Troy and bigHUN brought up very valid points. For accomplished shooters, it’s very surprising how consistent you can be throwing shots...

Mark, as a builder of these things for years, I can tell you that misalignment will cause loss of accuracy and clipping without...

Carbon fiber wrapped tanks are actually aluminum and wrapped in CF. Fatigue is what kills HPA tanks regardless of material. Every time a...

I think this is a non-problem. Just refill the tank after every magazine. Problem goes away.

I find your criticism out of order. You just spent a lot of money for a gun you just received and you are bad mouthing the gun with no...

The reason I bought mine many years ago now was the weight and balance closely resembled the Thomson contender. I was not disappointed.