Recent content by squirrelinator

Well on the wood stock or at least mine the wood rubs the sides of the tube on both sides I can sand that down for clearance the thing I worry about is that there will be only one screw holding the stock to the action and yes its a avenge x I will try removing the oring off the barrel shroud...

Does anyone have the bolt probe oring size for the .25 cal on the avenge x

I had a leak in mine it was the foster fitting I tightend it no leak since

I have not tried floating the barrel by removing the oring I don't think you can float them both because there would be only one screw holding the stock on . I did get ahold of a bullpup barrel band and put that on forward helped a little

I have a wood stock average also and I was able to fix the problem because the avenger has 2 action screws. I bought a black arts barrel band and a donnyfl adapter and sanded the inside of the stock so the barrel and tube are floated. The average x wood stock only has one action screw. Will...

I have a wood stock tube version. 25 cal and I am getting a constant poi shift left to right I will shoot a few groups no shift, go to shoot an hour later get a poi shift again and again. 25 grain fx pellets 905 feet per sec 2200 on the reg anyone else getting poi shifts. 50 yrd zero