SpiralGroove's latest activity

historical reality is that across the board tariffs do not work. the statement jobs will be created is also not true. jobs require...

Marine ply is very $$$$$ , i would use 2x6 or 2x8 edged and glued to make a top , then several coats of marine deck varnish OR just...

Hey KSK, In hindsight, I may have misread the Ace box top containing the gun screws sizes (Edit 8-40 & 10-32 see pic below). I simply...

- These screws (8-40 x1/8, 10-32 x 1/8) cost $1.19 & $1.49 respectively at Ace Hardware, hence each gun will cost less than $4.50 using...

Ace hardware sells gun smith screws. I have had good results using their slotted blued grub screws that are slightly undersized. The...

This is a BSA .22 Mercury Challenger Carbine I refinished some time ago. I don’t normally like gloss, but it came out so pretty. And has...

That’s a beauty. Walniut is a gift to refinish and make beautiful. Beechwood is a pain. I did this JTS Airacuda also. I could see a nice...

BOG, I almost always refinish or strip -ALL- my gun stocks … as I can do better job than most manufactures with the exception of beech...

Jim Maccari of ARH mentioned to me; heavy pellets in .177 cal. will diminish spring life. He said this regarding a R1 in .177 caliber...

My thinking is exactly correct. I agree that you can go too light though. Too light a pellet will give you a quicker, harsher shot...

You can't use pellet weight comparisons between two different calibers. Because of the physics of the larger bore's cross section, a 22...

Hey BOG, Your strip stain of beach and other processes are pretty much the best handling of beech I’ve seen. I had a Stormrider years...

I own both and enjoy them both, but I shoot PCP more. Springers definitely require more concentration on the basics of shooting and I...

All of them , now I’m broke,lol.

Of course not I will post all his information once I get the stock, I just want to make sure everything goes right 👋