spade151's latest activity

I’m in Stroudsburg I have a 350mn leishy 9 and a 250 .22

4x2 steel beed also on Edgun.shop under parts section Has the grooves and everything part number # lsa 222021

Never checked if the ball was damaged though number 45 I put 3 in there 😮‍💨

I replaced o rings 36 38 and 39 the little ball on 41 is there and seated but I’m still getting air through that pin like the valve...

Oring on white plastic rocket or brass cage. Or dirt on ceramic ball that seals the back of the plastic rocket.

For these small parts having a jewellery lupe close by is always a good thing. I would inspect again if any foreign object/dust/dirt got...

My point is simple. You are experiencing clipping and the cause is that the moderator bore is not in line with the barrel. You don't...

P.s I’ve also tried putting compressed air into transfer port with finger over hole to try and create back pressure to seal valve. I’ve...

Can one of you guys please help. I replaced the ceramic ball that holds the valve pin and it looks like it’s seated correctly and the...

Can one of you guys please help. I replaced the ceramic ball that holds the valve pin and it looks like it’s seated correctly and the...