Recent content by Solomon

Hi ,, Every one ,,,, first of all I like to Thank every one try to say any thing ,, just to help . Second I just get my gun from the shop I bought it from and it give me now 920 fps on 18 gran How ,,?? , as the picture :: but because I make many shots without removing that screw it BEND...

Long_Gun_Dalla yes that what I am try to say ,, It's ok to get 680 fps in low speed , But in a MAX with max hammer spring .... !! no way ,,, I think :: the reg is damaged ,, because I see that the reg Pressure is move to 130 bar after about 16 hours no use ,, is it ok ? or ,, there is some...

lenweber2 No I can't try another crony :( ,, and thank you for your advice . Long_Gun_Dalla yes I read about that 130 -135 bar ,,Yes I have Gamo Black Shadow (.177) and I try it with the crony it give me 770 fps with 7.56 gr :( I don't know if it is the correct speed because I found...

Hi Mr.Stoti , I already do that - " keep turning the hammer spring pre-load until the power wheel will barely turn " I start with it but I keep the transfer port wheel to .177-22 cal and I didn't play with the reg. at 140 . I only move it once on the shot No.8 and I realize it only give me...

the Gages 

hi Yo, the Rifle pressure is almost 240 -230 and the speed as the 15 shots in the pic every shot with 1/2 turn on the hammer spring adjustable ,, so if it mixed out what you suggest > ------------------------ FX USA , thanks for replay ,, I already send an Email yesterday with my issue to...

I have a problem with my new rifle crown , I bought it around a year ago and can't use it until a few days ago I bought a A FX chronograph and when I record the speed of the Pallet it couldn't give me more than 675 fps in 18 gran JSB with 140 bar for the chamber ,,,, so where is my problem ...