sobdiver's latest activity

In response to my question if they were going to cover the return shipping and what does “we will have a check” mean I received this...

I asked for a warranty replacement and received this reply from GX a little bit ago: I'm getting a very bad feeling about this. I...

Update; I inspected spring in check valve at the request of GX support, it was oriented correctly (of course), I replaced with one from...

After hours of research here at Airgun nation and on Youtube, I decided on the GX CS4. A properly functioning unit should more that fit...

My last dead head test to 300 bar went up to 2 minutes 50 seconds. Prior to flushing with water I removed the check valve and cleaned...

Yikes, what a mess. What was you dead head test time new?

I used distilled water, but did not boil. In the email from GX and in the video they didn't say to boil the water, but good observation...

Yes, I ran water through the cylinder exactly per their instructions. Some here have thought that was a bad idea, but if I'm potentialy...

Update: Did a dead head test last night to 300 bar, took 45 seconds. Just did another one this morning and took 2 minutes 37 seconds! I...

So, are you saying to not use the auto shutoff feature, to watch the needle and open the bleed valve when you get to your desired pressure?

I'm certainly not an expert or know all on the GX4 compressors, far more knowledgeable people on the forums than me. Have had mine 18...

Yes, I think you might be missing something. My brand new CS4 was intermittingly filling very slow (over 2 minutes dead head test...

Last week I received a GX CS4 compressor ordered directly from the company. Intended use is to refill the 580cc tank on my FX Crown. My...

My understanding: 1. For cooling distilled water will outperform antifreeze, so only use antifreeze if your compressor will be in below...

Very interesting! I've had a low first shot issue on my FX Crown that I know isn't the result of regulator creep. The issue has...