Recent content by Snowbird

I think Glem use the crown barrel inlet for is LW barrel .25 for slug.

The link dont work ,the title of the video is The crown impact TP removal and installation by Ernest Rowe

There a video on that https://youtu.be/TjDZFikC7MI by Ernest Rowe

It is 2.4mm x 11.6mm for the genuine regulator

They say that because the aluminium bottle is longer and toutching the shroud is you unscrew it.

If you ever get a 700mm .30 keep us inform about the modification and the gain over the 600mm .30 of the boss.

No, my power wheel as only 2 setting and it is 5mm on max. Never touch that end.

Hello, I forget , when I remove the barrel I was able to push down a 5mm drill bit true the power adjuster to the valve pin easy.

My stock attach bolt is M6 and the r500 was regulated with SHP valve in it

No, I try it, I have a boss and a royale, I exchange the hammer weight and nothing , my 25 heavy was always around 845 fps.So I begin to check why and discover the port between the plenium and the valve pin was smaller than 5mm. I empty the action take my dremel with a small grounding stone pass...

Take a look on that site http://www.100mairgun.nl . This is why FX make the boss, 100 meter competition in the netherlands.

Thanks

AirgunBill , I bought 10 to run some test, if you use these , do you feel the pellet probe much tight than the original size.

Try there the service is good http://www.bearingshopuk.co.uk/6-35-x-1-27mm-nitrile-70-o-ring-35316

The day fx is going to sale a repair kit easy to order on the web, I will buy a crown, I anderstand that every regulator will creep one day but not so soon. But I want a shoot .30 this summer , so I call my fx retailer and he put aside a fx boss for me. I already receive a second huma...