SmackDaddy's latest activity

called the Utah airguns today with Mr Alex, explained him the problem and he said it is definitely reg creep, so Shipped my drs to Utah...

this impulse air suppressor is the best in my experience to quiet down this loud pistol for sure…

First post here. I have been reading and learning all I can to have a backyard option when I don’t feel like going to the Range...

Yeah no leaks… I leave my drs filled up for weeks and the pressure guage stays same.

Even with no creep the DRS suffers from slow first shot. Its something typical with FX. The only way to tune it out if you dont have...

Hi, Sounds to me like it is time to replace the piston in the regulator. There is a delrin seat on the piston that can get deformed...

Yeah the low velocity start is probably from a good amount of reg creep. Probably needs rebuilding. At least it isn’t leaking I guess...

It's probably the regulator. I had the same issue with mine. I replaced the regulator and it's been fine since.

Hello there friends, my drs which I bought last year about same time from Utah airguns, the reg was set at 810fps using 10.3gr this...

As stated above lol . The chevron was and has been my answer for an affordable 1 moa replacement/substitute for myself that works...

This sp-1 red dot looks awfully similar to Diana red dot that came stock with my lp8 magnum carbine..

You will need to look for a millett sp-1 red dot on the used market. I have one I love and wished I would have bought everyone I saw for...

I tried red dot by Diana 3moa in lowest brightness, only good for 10yds tried votatu laser good for fixed distance let’s say if u set...

Wow! What target and distance?

Haha.. the first part is buckrail tapered suppressor & the ring u see on it is actually the adapter of my Orcair barrel mounted...