SLICKNICK's latest activity

oil or water in second stage. It’s enough to stop it cold. Did you over fill oil?

I had to do cylinder swap, and I had too mill off about 3/8” from the cylinder in order for it to fit into crank case. It was too fat...

Hello everyone. I'm just posting to introduce myself. I am a 47 year old avid airgunner from Corpus Christi, TX. I fell in love with...

I don’t know if prices are up but Tuxing distributes tank and valve from California. That have been very reasonably priced

Except the point was light and portable. SCBA metal tanks are heavy. About twice what the Tuxing/Alsafe/Acecare 3L CF tanks weigh. I've...

On 3 of my tanks. The best part is you can easily daisy chain them, as many tanks as you want

yes much easier filling.. duel gauges allow you to read tank pressure, the single gauge only reads fill pressure so to check tank...

If you don’t change lower piston rings on hi pressure side piston. It will chew up new hi pressure piston rings, until it ruins the hi...

When you do a full rebuild. If you don’t have the new style head. Buy the correct cylinder and piston for the Yong heng style hi...

I'm glad you have got your wires working. I see you have been on form for long time. Just wanted to mention that I too have a TXED012 ...

Thanks so much. It worked perfectly. I was really concerned that I would ruin a $400.00 compressor by wiring it backwards (or sideways...

The plug on right, it’s red on top terminal, yellow green on middle terminal, and black on bottom terminal. The plug on left , top...

Ahhh haaa. I get it now. Thanks for the math lesson. Seems so simple when explained. (y)

This keeps my CF tanks very dry. I have the cotton filter that came with pump, and extra desiccant filter connected to a .5l cheap 4500...

You can usually tell the size of plug by the size of wire on cord. #10 is good for 30A, #12 is good for 20A. You can also read the name...