Sicumj's latest activity

I know the AEA HP series has a bad rap. I own 4 and I have had good luck with them. My favorite compact SA is the AEA HP SS in 22 cal...

There is a set screw in the trigger that you can remove and round the point off some. Helps with trigger pull.

The STX 700 Heavy sells for $110 by itself. You will need to order that.

Go with ARH. Springs hold up very well. Seals need sizing you can do it with a drill and sandpaper. I use a plastic water bottle cut...

Less than 200 bucks in 177. Shoots hard, very accurate. I got a pretty nice stock. It will be my gun off choice for shooting bugs...

I have been using these mags and they are very reliable. I get about zero jambs out of them. Some pellets just won't work like the...

Fox Air Power

Most if not al l of the hammer bounce generated across Aea models is caused by weak inadequate springs. They wear and lose their tinsel...

I've looked at manny chambers that appear to have no throat at all. I don't know what the ultimate degree would be. We will know more...

I have some P M me

Both are pictures at the end of chamber beginning of throat. You can still see a small edge where the chamber ends and the throat...

Should be tapered and polished some. This is after tapering before polishing. Used a No.1 1 in 48 taper reamer.

This is what our barrel looked like prior to tapering.

I noticed when I was shooting several slugs lately. The NSA slugs chambered harder. I think they may be a bit larger and a bit harder...

The lead in our first attempt was 1 in 50 which is common with most taper reamers. I read though, a lead of 1 in 100 is preferred. I...