Recent content by shotmaniac

wish i had the skill to make pup stocks

the m25 is well built super simple platform easy to replace parts etc I'm actually impressed with the plenum on this thing, not easy to find regulated high power the issue that really breaks it for power is the internal probe screw thing in single shear but I'll see if there's a hole for a...

i tried but it was really difficult, on a pic you posted earlier i couldn't see any threads on the barrel itself is it fixed by a grub screw somewhere on the receiver?

one guy on reddit did it to reduce the length supposedly you can just replace with the tube now that i got it though I'm more interested in keeping it regged, how high does the reg go before it stops regging? also any tips for removing the barrel? not sure if it's bent or just the tube giving...

I'm trying to decide between a m25 and another condor clone, the reg is obviously a disadvantage for power so is it easy to bypass it or do you need special tools? also which slug size goes better on .30/35 calibers?

groove is the bigger diameter, how can you even chamber that?

you mean bore diameter? how can you shoot something bigger than groove diameter in an airgun?

isn't iso 46 too thin?

hello, i have limited options in my country as far as non-detergent go there's only mineral compressor oil or synthetic PAG46 for AC compressors which is the best option in your opinion?

any links to a drain tee or valve? my tuxing is the poor version without any filters, i was thinking of using this mod to cool and condense air before the second stage but i reckon water would drip back to first stage so not sure what to do the sieve/acid discussion is interesting I've also...

that's confusing you know the quantity of sieve used in these filters can saturate in less than one hour at typical compressor flow rate(assuming no first stage water separator) people would replace it all the time, are you sure it doesn't lose some water when pressure decreases?

where can one find the stl and check valve?

those use 4A sieve right? same as the tuxing dual stage $200 filter i think I'm actually researching it cause there's a risk of trapping nitrogen and concentrating oxygen which under pressure could be dangerous OP from what i read the sieve can trap moisture faster and is more resistant to HPA...

it's fluoride based got a bunch of these from china *********** does anybody know what is that thing, looks like a voltage selector?

the brass bit is what screws inside the inlet to hold the valve spring and also acts as restrictor by means of a through hole(like a restricted transfer port) the valve stem on the clones i've seen from 8 to 9mm(for ..30 and .35 caliber clones) some are tapered some not, it seems the critical...