Sergey1972's latest activity

Totally agree with you. You are taking for granted how much you already know. How do we point people in the right direction without...

no different than ADDING a gauge and keeping a fill foster .... Just be creative with fittings while making sure threading & type match...

If it was a Tee you could have gauge on the other side. By the way, 1/8 NPT in everything only if you retap the threads and have enough...

No but I'm taking for granted my skill set and shop setup (paintball gun manufacture since 1987 and aerospace machine shop). The tee...

You can put a 3 way tee and have both.

If you "peened" the hole pins will stick. If the pin hole is not flat bottom and you push on them, they will stick in the drill point at...

Plastic or wood cutting board. Pound receiver on the board, see if pins drop. Depends on how tight they are. Use of plastic plugs...

Same here... all manner of night time critters here, though I've yet to see a chupacabra. I think I'm too far East for them.

HAs legal issues. Might be in grey area if light is separate. Have to check laws yourself or just use a Red Light.

Aliexpress will sell to you. If it says USA stock it often ships from Amazon warehouse. Cheap scope addon with 3 to 5 inch screen is...

Got one that .35 .36 or .38 from gunbroker. Never fired it.

Is it the reading or comprehension the issue with some people? I HAVE 2 GK1’s, actually 2.5 if you count the .177 barrel/mag… but i...

Mike, I live exactly 1 mile from Joe's shop, his tanks all come with the "DUAL" gauges, I don't know about the Omega tanks and their...

Rotate radiator or you'll never get all the air out of it.

There is a large piston that move up and down, small piston inside of it. Up stroke is 1st stage on large piston and 3rd stage inside...