Sergey1972's latest activity

There is a piece of oring rubber that keeps the trihger adjusting screws from loosening. That oring just looks like foreign object...

Tighten the barrel itself to remove the play and set proper gap magazine to barrel.

There is a bearing the mag rides on. Your barrel is out and its allowing motion along barrel axis that it normally would not have...

Should work with paintball tank pressure. Lower velocity likely. If it doesn't recock you may have play with velocity adjustment if it...

This listing has been renewed

I use this one when I want to take a smaller bottle with me. I've had it for years problem free. Valve works fine and very smooth. Male...

Look for small tank with fill nipple (male qd for filling the tank) as well as output male. Then you don't need the male to male. I'm...

Thats all it takes. Ebay doesnt want to track by county so they ban whole state. Amazon you cant get a red dot shipped to Cali if...

Missing the bubble isnt an issue if you like the gun. The info is still on AGN just have to search.

.25 is limit on ebay. Happened on L2 .30 before. Saw some listings with no caliber but good picturea of labeled mag or pellets. That...

You may want to use the search function as well. When i was repairing and hot rodding my uncles marauder I foilund lots of useful...

Full stainless is fine for my M3s..... I did turn down the knurling on my lathe.... To clear the opening on my K&L lower rail.

I recommend getting the threaded version and putting a hardened steel male on it instead. The brass male is cheaper and shorter but...

Sounds familiar. I went to van nuys high if that makes a difference.

OK, don't wear YOUR glasses. If it's someone who normally has to wear glasses all day (for both far and near correction) they will see...