Scotty1's latest activity

"Anything else I should look at ?" Yes, a compressor & used SCBA tank! You can get BOTH for less than one of those new Great White tanks.

Been running an Alkin W31 Mariner for around 4 years. It tops off bottles fast and can handle consecutive SCBA tank fills without fail...

To some degree, yes. Seals/ o-rings can and will degrade with age, not really damaging to the gun itself, but requiring maintenance...

You have way too much hammer for your use case. I would lose the hammer weight and consider putting the pellet probe back in. You are...

For an 18 grain pellet a tungsten hammer is too much for it unless you use very minimum power adjustment and 150+bar. The tungsten...

@miamiguy2017 I recently ran my Alkin to top off a 60 min, 45 min SCBA and a 100 cu inch CF buddy bottle. My total compressor run time...

Recently received a .22 caliber 28 inch LW poly barrel 1:15.75 twist for my @Skout-airguns Evo. Up to this point I had been using an FX...

I shoot my Walnut-stocked K1 .25 pretty regularly. Not lots of shots in a single setting, maybe just a mag or two. Today I decided to...

It’s a 3 stage just like the Bauer. I think mine weighs about 95 pounds. I just keep it on an old dolly so I can roll it around on my...

Very nice! I’ve always liked the compact package of the little Bauer. Is it 3 or 4 stage and is it as portable as it appears?

Having this been an on-going project these last couple years, this just a revisit and share of the ever ongoing search for the ideal FT...

I’ve got .22-.35 in JSB pellets, no .177 left as I gave those away.

Sorry, no picture.

Like this? Here I was thinking my Alkin was kinda serious …

I had left the previous low settings on my EVO but today the 16gr pellets were averaging 788 fps with a SD of 9 for 29 shots however I...