Scotty1's latest activity

The string above was es of 3, sd of 1.3 I need to run a full shot string down to reg pressure to see what it’s really doing, but I’m...

That would keep me up at night, something’s all caddywhompus there.

What causes the barrel & bottle to not be more parallel to each other? Never seen it to that degree on a gun before. Just curious.

I have one of these: The problem was in the cylinder itself. It went bad right before it went out of its three-month warranty, so...

Previously I had a descending shot string of 15-20 fps over 30 shots.

I was never particularly happy with my ES or SD numbers with my Epoch, until I replaced both regs recently. Ran a shot string and shot...

More cowbell!

The P1 with the regular valve can be adjusted to very low power settings. (Example: P1 | Regulator at c. 82bar | .30cal | 26.9FPE...

I would put an adjustable transfer port on the Skout Epoch or Evo and be done. It already has the rest of my wish list. Electronic...

I’ve had my P1 for 5 years and never had any problems whatsoever with it. They are a very simple design, with little to go wrong, and...

My Alkin was the same, cord, no end. I used a 30a 220v twist-loc plug and receptacle for mine. I figured they don’t know what the end...

i'm proud of you !! (y)

@greenbeans - I forgot that I put a 580cc bottle on my P3. I have the orginal 500 and both have the valves in them for a "pressured"...

I do all my testing at night because of wind. I don’t live in a tight neighborhood but I do have neighbors 100 yards to the left, 100...

I needed a 70 year old Benjamin Franklin rebuilt for a gentleman whose father purchased for him when he was 7 y.o. Rich...