Scotty1's latest activity

I’m assuming the second sound is from the pellet hitting the target? Are you just hearing the reg refill the plenum after the shot?

I use Nuvair 751. Seems to work well. I do see a little carbon buildup on the top of the high stage piston when I look but I think...

Those are the trigger springs, they are very small and soft. Similar to old AFX slot car brush springs, if you are old enough to...

The OP states that the vendor is one of the TOP THREE vendors. That is zero percent informative. My top three are going to be vastly...

I would try pulling the knurled adapter from the valve and check for restrictions or an extruding o-ring?

Hi other shooters. I had an FX Crown for 5 years and I don't understand the problems you are talking about. To evaluate a rifle, I...

I used these shim washers to adjust where the gauges fall on my Prophet bottle.

It is not often that I am 100% thrilled with a large HOBBY investment but I am with my Corbin Press and the super great support from...

I bought my 2nd Athlon Argos HMR 2-12x44 via Amazon about 18 months ago. It was a "Used/Excellent (returned) scope Foolishly I did not...

This Airgun needs no introduction and is quite frankly legendary for a good reason. Yesterday on my first competition with my Thomas...

This is such an amazing company. They really do 'get it'. They are proactive with any issues, proactive in getting their customers...

Skout Epoch?

Looks like you have the screw turned all the way in and not out. There should be a gap in front of the slider and not the side closest...

Thanks Ok, Understand. If that is the case then I dont need to remove the screw because it's sliding fine and the wheel turns fine too...

Hmmm, it’s 2:38 am and you have stumped my tired brain, but you have the concept and seemed to have remedied your concern. I’ll have to...