Scotty1's latest activity

100% Tariffs and Covid are convenient excuses to increase profit margins for big business. The rich keep getting richer with the help...

The hose had a coiled spring strain relief. I moved it out of the way to take the picture. Aside from old age, this hose was...

A very long life, and a predictable failure point. I wonder if a strain relief on the ends would have extended it even further?

If you raise your reg pressure, without adding more hammer energy, your fps will of course drop. Maybe try 100 bar… it’s free to try it.

if you mean the flat cap compared to the knurled caps...then Yes

Stocked cracked in half, barrel cracked down the middle, and the lenses cracked. I thought it was obvious. Can't help you more than that.

Lamar, Putting on the o-ring that broke off can be a PIA. It is a 2x1 NBR90 o-ring. The NBR 90 means that it is very stiff and hard...

I think my Huben changed that for me. If it were all just about the semi-auto I would agree, but these hammerless guns bring so much...

Poking the bear is not always the best plan! There's a lot you don't understand about living in US. I see you mentioned shooting in city...

> “Retired and rambling? That’s fair—I’ve earned the time and the miles. But let’s not forget, I started exactly where a lot of folks...

I jumped from a YongHeng straight to an Alkin compressor. Had the GX line of pumps been available at the time, I would likely have tried...

My Vortex Razor will focus down to 10 yards at full power, but it’s pretty pricey.

Is there any reason you couldn’t replace those lines with flexible micro bore lines, and adapt to a more common series of connectors...

In February 2025 I purchased a GX CS4I and from initial turn on I experienced random shutoffs every 5-7 minutes while topping off a 6.8...

Right on! Working on them is rewarding and you’ll learn a lot. There’s so many parts or mods you can do. You could start with something...