Scotchmo's latest activity

OKCGC had their “XFT” field Target match this past May 31st. We had 13 shooters! 3 came from another Silhouette powder pistol match at...

Your conclusion was based on a faulty comparison. Use the same airgun and keep all settings the same, including pressure and hammer...

So here are some perspectives to help: Imagine if we were forced to decrease the elevation of what you are "used" to. For example, if...

1:19 is unlikely to adequately stabilize the 80-100gr slugs that you are looking for.

Long slugs typically require a faster twist rate. Otherwise, accuracy can suffer. Do you know what your twist rate is?

For airguns, over 100yds is often considered ELR. The Oregon match consisted of the following: 140yd, 2in square, 5 shots 166yd 3in...

Hey guys! Fresh off of the weekend at the Ashland Oregon benchrest, EFT and long-range shoot. I did not do extremely well on...

I got the talking timer last Friday and used it in the RoT match Saturday and Sunday. It was a hit. My squad of three enjoyed it...

When we used to hold GP matches at the Morro Bay course, we did not use general timers for everyone, even at the 2021 National, no...

I go as far as .0005 to .001 under groove diameter. The lands will usually bulge/squeeze the lead out just enough to seal the groove areas.

Slugs are not as forgiving as pellets. You need the right twist rate for the LENGTH of the slug but it also must fit the bore correctly...

Lack of enforcement is one reason ... 3 man squads mixed in with most at 2 man is another .... If you add 5 min x 15 lanes for an extra...

Today we had 5 shooters show up for fairly mild conditions.

Copolit A slug is a unit of mass primarily used in the U.S. customary system. It's derived from the imperial unit of force, the...

Best that you make the distinction between lb weight and lbm. A slug is 32.17405 lbm. There are 7000 grains in a lbm. 7000 x...