RWL's latest activity

PS. High Pressure Pneumatics had the best price with shipping - at least back when I first bought this. I haven't shopped since the...

The Vendor and Huben made good on sending me a new style Regulator body with a relief cut for the Talon valve and the new regulator body...

Thanks. I assume 1/8G another name for British standard straight pipe thread with a 1/8" bore.

I want to put a longer whip with a quick connect on my hand pump. The male threads of the new whip are m10 x 1. I'm not sure what the...

The vendor sent me a replacement thinking that the first one might have just been a single dud, but the 2nd one has the same problem...

The vendor in the US is an authorized Huben dealer. He got a nonsense response from Huben along the lines of "the threads are worn and...

The valve / tophat is original to the rifle, purchased by me circa 2006. This was pre-SpinLoc.

I bought (from a Huben authorized vendor in the US) a Huben Max-ATH 50cc Universal regulator for my AirForce Talon SS, pre-Spin-Loc...

I decided to use my own Talon valve and went with the Max-ATH universal regulator, sold by High Pressure Pneumatics from Michigan...

Thanks for your help and the video. I couldn't find anything similar on the internet illustrating that the Regulator would swivel...

I will probably not buy a separate high flow valve - at least not for a long while. Although Nick, the rep at Huben suggested the...

Is there an adjustment somewhere on the ATH-Max regulator to get the gages and fill nipple in the correct orientation? How do you do...

Thanks for both of your responses. Nick at Huben power recommended the universal variant of the Max-ATH. That way I wouldn't have to...

I am the original owner of an older generation pre-Spin Loc Talon SS. I guess my thought process was that I'd like to have a gage that...

Out of curiosity I went to the hardware store and bought an O ring. It's 5/8" outside diameter and 1/16" thick. 1/2" inside diameter...