Recent content by Rwindsor

I didn't write this post. Don't know what is going

Nice article from F6 Hawk. I'll try to keep this short I have the Omega Trailer Charger I decided to tear it down and see what the problem was. While putting it together I noticed the intake filer had some grease showing on the top. Unscrewed it and found the whole elbow fitting was full of...

Yes, it did thank you now to get my grey cells working.

I'm curious if there is a computer-generated video of how the air flows through a portable compressor. How from the intake through stages it builds up pressure to the outlet. With so many people on this site surely there is someone with the knowledge to do that.

I too found the Air Gun Geeks podcast very informative. I was turned on to them at our last match when talking about GX portable air compressors. After watching all the past pod casts, I learned a great deal of information. They also have guest appear Ted Beirs, FX founder's son, Chris Turek and...

I want to thank Shane and Todd, a very much appreciated "shout out" for help with my Omega Trail Charger compressor. In these times It is so comforting to be able to talk to an actual person to get help and/or advice. If Shane is too busy to take your call, leave a message and he will always...

I want to thank you for showing this. This post just fell into my lap right time right place. My Omega trailer charger has been not pumping correctly, I call it flat line about 2000 psi. Worked fine all last summer then this problem started. DH test was 3 minutes for 4500 psi. I ordered a GX...

IN

I bought 4 tins of JSB 18.1.3grs this fall dated them 8/11/22. I short by head size, use pellet sizer and weigh them. The weight variations are from 17.8grs to 18.3 the bulk of them are 18grs with the outliers 17.8 100 pellets 18.3 about a 100 pellets out of a tin. I was looking yesterday at the...

You probably know this already but sighting the rifle in off a front rest and then shooting off hand the rifle will shoot low. To me the best way is to shoot the rifle holding like you would shoot off hand only rest your elbow on the bench that should get you closer to being on when shooting off...

I agree with Bear-of -Grayling. If you cock the trigger when installing and not pull the trigger after re-assembly it will not cock when you pull the under lever. And IMO the trigger is set too light or the safety wasn't assembled correctly. If I remember right the safety must be on when you put...

You did a very nice job on the 300S. When I got mine from Holland I thought about a re-finish but I liked that I could see honest wear and use so I left it as was. No dings or scratches.

I have a TX 200 .177 and a HW 97 .22. The HW 97 shot cycle was very rough so I installed a Vortec tune kit which calmed it down quite a bit. I consider it more of a hunting rifle. The TX 200 was also a little bouncy so I put a tune kit in it now it is very smooth and I consider it more of a...