Recent content by Runefalk

No problem 🙂 I have managed to order the air cylinder from Huma but thanks for your reply

Hi. I was wondering if you please could share the dimensions of your plenum? It would be at great help for me and other people. 

Hi. I have a Dream-pup in .25 cal whit a 600mm barrel so I I'm wondering where you bought your 290cc air tube? Do you have a link from where you bought yours??? 

I'm using the stock spring. You can use the Fx Boss hammer weight. If I remember correctly I think it weight around 13 gram so then you can cut it to the weight you want https://spares.bagnallandkirkwood.co.uk/product/part-a7-fx-boss-hammer-weight-17003/

 

Yes I do but I'm not sure if my gauge are measuring right or not and the only mode I've done for now is a 9.5 gram hammer weight. I haven't been able to test the shot count yet because of the bad weather we have had here in my hometown but next time I'm going to count the shots. I have also...

Only mod I use for now is a hammer weight and 165bar on the regulator. My Crown has a 600mm barrel,the next mod is the Huma transfer port and a 6.35mm valve seat. I have also a couple of extra hammer weights 12.5g and 13g that I'm going to test out when I have the time. I haven't got much...

My Crown is .25 and I used JSB 34 grain and managed to get around 88-89 joule 

I am using a 9.5 gram hammer weight and have the regulator set to165-168. I'm from Norway🇳🇴 so sorry if my English isn't the best :-)

I'm pretty sure that the Fx Boss hammer weight will fit in the Fx Crown to. Copy from Bagnall and kirkwood https://spares.bagnallandkirkwood.co.uk/product/part-a7-fx-boss-hammer-weight-17003/

Hi. You can buy a hamme weight on ebay from a seller who's name is chsae_52.He can make it with your specific choice of weight. He also sells a 6.35mm titanium valve seat for the Crown/impact :-)

Hello Mr. .I have a Crown in .25 that I have made a 8 gram hammer weight for and with the regulator turned up to 165-170bar. The next thing on my list was to buy a huma double TP, and I have a question, did you mean that if I did a dobbel port prob it's known need to buy the huma transfer...

Yes the Royal use the same hammer as the Crown Copy from Bagnall Part D8 – R4: FX Hammer – 19039 Replacement hammer for the FX Royal / Royale, Indy and Independence air rifle. Part D7: FX Crown Hammer – 19039

I'm pretty sure that one of these hammer weigh would fit your Crown Here are some more of the hammer weight to different FX rifle that could maybe fit FX Crown, but I see that some of them have the same product number and probably are the same weights ...

You might find a hammer weight to fit your FX Crown here🤔 Here are some more of the hammer weight to different FX rifle that could maybe fit FX Crown, but I see that some of them have the same product number and probably are the same weights ...