RScott's latest activity
Good post! one big surprise I’ve noticed is that 34 mm scope tubes will generally also have a greater spread on the parallax wheel. A...- I have both the NX8 4-32 Mil-XT reticle and the Sightron 10-50 with a much simpler reticle. Bot have been accrurate on a couple diferent...
- RScott reacted to Troy Bakel's post in the thread Thomas Air Headspace tweaking, not the kind between your ears with
Like. I have a <12 FPE Thomas BR. During pellet testing the two best pellets were the H&N Baracuda FT 9.57 grain, 4.51 diameter and the... - RScott reacted to Vetmx's post in the thread Thomas Air Headspace tweaking, not the kind between your ears with Like. I would not recommend any space between a pellets head and the rifling. So since there will never be space involved, depth is more...
- RScott reacted to steve-l's post in the thread N/A What air pistol do you use for pest control? with Like. Yes, it is possible to dial the GK1's power down, but the time that it takes to do that is far too long for an immediate pest shooting...
- While trouble shooting accuracy problems we never thought to check this… it could happen to anyone! ;) A friend wanted to do some...
- The price increase you see in the U.S. is a direct reflection of the 10% tariff put on all products coming from the U.K. to the U.S. The...
- RScott reacted to OC_'s post in the thread What are your thoughts on 3d printed accessories? with Like. I did this chassis for my out of control 177 avenger project.
- RScott reacted to Xono's post in the thread What are your thoughts on 3d printed accessories? with Like. Maybe one day we can 3d print pellets. Hehehe
- Again...didn't read the whole thing...but I treat airgun barrels the same as he treats Rimfire barrels. Rimfire barrels are 416...
- This has been a project on my bench for a while. I designed it pre Helene, then came Milton. Shop had 42” of the Gulf of America in...
- We need to rework a new one with ceramic glide plates, and either a helicoil on the elevation knob, or better a hardened knob out of...
- I'm sorry to hear that Randolph's QC is in the tank. My Randolph front is at least 9 years old and it's always been smooth and steady...
- RScott replied to the thread Resources Mac1 USFT shooting techniques???.I switched to a shorter, stronger spring that has 1/8" free play about a year ago. I did it to reduce the very loud report I get from...
- RScott reacted to JW.'s post in the thread Petition to Allow Laser Range Finders in Field Target Competitions with Like. You can shoot Open without a harness... AAFTA WFTF is not changing unless it changes internationally. In the end, if we continue to FT...