rschony's latest activity

Right now i have the jsb 16’s at around 15 ft lbs. 2 mags 20 down to 20 mpa. Hopefully this weekend i can up the power see if i can get...

inside the firing valve. A oring and peek backing seal. I believe early valves were threaded together. Theres no way to screw/unscrew...

Ask Kelly if he has any of the bronze springs. They’re made of phosphor bronze which has a better fatigue resistance than most types of...

I'm guessing it's forward as I didn't need to remove the rear cover to reset, just air it back up.

I'm having same issues as kenjeepman. props to him for putting this work in. Mine is a 177 and I have a great 4 mag tune at 12ftlb...

I have the same issue with my 177. I have a good low power consistent tune at 12ftlb good for 4 mags. 3/4 turn out, 300mpa to about...

is it a water/moister issue

Definitely possible I guess, what are your thoughts? Kind of like steam damage?

I think this is a non-problem. Just refill the tank after every magazine. Problem goes away.

Yea ok.. just deal with it .. a $1500 gun smh.

Clean it, lube it and turn in the left trigger adjustment screw and see if that helps

I just pulled mine apart earlier today. Was having issues with fluttering after a shot. Mine looked worse than yours ☹️. I cleaned it...

25 yards full auto on the left, 50 yards semi auto off a bag on the right.

Pulled the trigger on a 177 last night. Looking forward to trying it out 🙂

I do 177 cause pellets are cheaper. Just stuffing pellets in my guns they aren't as accurate as reseating them to the front of the mag.