Recent content by rrmccabe

I have a 20 cal RX1 commemorative edition rifle for sale. I am the original owner and bought it from Robert Beaman directly. I can email you more detailed pictures as needed. The RX1 was outfitted with the blue ribbon scope at time of purchase. They added the block-off plate to cover the...

So took it up to north part of my land. Running low pressure until I get to chrono it. 50 yards into a 6x6" box. Shooting out of back of pickup with gun propped on a back pack. 10 shots fired aiming for center of box. 7 shots you can see. 2 grazed the left side of box and one cant be found...

Its back together. Going to chrono it this weekend with a friends chrono. Easy job really. My schrader valve has a small leak but the o-ringed cap seals fine. Dont know if that is normal. Wish I had ordered the schrader valve now and the main forward piston seal. But I think its going to be...

I really don't know but I think the nitrogen was an option and not standard. And if humidity is a concern the humidity in my house is 37%,

Well only took 2 days from order date to get parts from Europe to US (California) and 3 weeks to get them from Cali to Iowa. But they have arrived!

My airpump came today. I thought I would try a small pump on it and see if it held air. Do not have a chronograph to use yet. That made no difference in barrel cocking so I tried a full pump. Might have made a slight difference so I tried three pumps which started to feel some barrel...

I found this. I think it applies to our guns in general but will let someone like Yo chime in. http://www.airgunforum.co.uk/HW90strip.html

No specs in this but this confirms what I remember about the production numbers.

Ok good info. I just tried google and only thing I found which ironically was on this site was: "Beeman Silver Jets at 11 gr. @ 910 fps " I might go on the low side anyway so its easier to cock. At least when wife and I are just plinking here at house.

I dont remember what the manufacturer spec is. I was thinking that the 20 caliber RX1 was about 1050fps. Sound about right?

This came today. Pump should be here next week. Thanks again Yo.

Yea my balls are not that big. I cant shoot with buildings/houses within 200 yards and I have 3 houses that fall within that. I have a hill against the woods so its safe to shoot. I may have tested the AR. I cannot confirm nor deny that :) I am doing the 80% lower route. Tired of what is going...

Well with Yo's help I am going to replace all that :) But good info. I live on an acreage now so will be easier to shoot more often. If only I could do that with the AR15 I just built!

I am just going to purchase a pump. I have the fitting on order. Appreciate all your help Yo. So do I need to get a hold of a chrono to charge it properly?

Thanks, I am all for doing it myself if it does not require a bunch of specialized tools. I don't have pump but would buy one if it did not break the bank. I did email Martin but have not heard back. I have a ton of tools and a nice shop. If doable, I am in!