RoosterCogburn's latest activity

I tried the huma reg in the katran. Needless to say the stock reg was quickly replaced. The airmaks katran reg is fantastic.

I should've clarified op. I know your mind. I micro adjust obsessively. When the ref adjustment doesn't have a gauge to verify. And...

Correct. To OP. When you see the highest number before you adjust and the fps drops. Dial back to.thst position and then 1/20- Yes...

Find the highest velocity for that set reg pressure before velocity starts to drop from increasing the HS then lower speed by 5% that...

From what I’ve read on correct pellet speed, it seems that you are trying to operate at excessive speed and destabilizing your pellets...

The air acts as a compressing force agains the poppet valve. More pressure. More force required to open for a long enough time to...

Reg up velocity down =need more hammer

Also. Give 12-15 seconds between shots to insure the same plenum pressure each shot. Shoot too fast and you'll be off.

I owned the SAME EXACT bchannel had. His .177L. The difference between sweet spot and not is about ⅙turn either side of perfect and it...

½Turn is too large an adjustment. Do ⅛ turns. Also 1 shot is not enough to know where you are. Adjust. Fire 3-5 shots. Adjust...

Have you talked to UA? That would be the next step after asking here. Obviously it's out of tune, has a reg problem or leaking after the...

Yeah the hammer spring setting at any particular pressure is a very very small window.. it makes it very easy to find. Its set perfect...

Selling a DNT Thermnight TNC225R digital Day/Night Thermal scope. Absolutely perfect condition. Factory reset, in original box. 2...

I messaged him . He was waiting on his supplier he's supposed to get back to me soon. Those prices are great. I do need to change to .22...