RoosterCogburn's latest activity

Are you actually working your way up and down or are you jumping from setting to setting? From your posts, it appears to me you still do...

Resurrection. Is this correct?

Marek was very kind in providing me information regarding the slash mag diameters. I inquired about this because I am familiar with CZ...

Recently acquired an AGT vixen Long. Came set to what I assume is Factory regulator pressure. APX 130-135b. Off the rip the gun was...

The regulator pressure is the plenum pressure 900 with 25.39 is the STARTING point for that gun. You should be way lower in the hammer...

Awesome. yes, try using much less spring. Theoretically if you go by fx's claim of 78ft lbs max for the 600/25 you should be topping...

Mine actually has an exposed wheel on the left side that adjusts the hex head that you’re showing.

you're talking about the hex head on the back of the receiver right?

Thats extremely high for 100bar your gun is capable of well over 70ft lbs of energy. I would actually go to 10 and work up notch by...

but also, if you increase your hammer strike power above the peak for a given set pressure, you're now wasting air

Correct, when you increase pressure, you increase hammer SLOWLY. go up 10 bar, click up 1 or 2, shoot 3 shots... see where velocity...

I agree. The small volume cf tanks are not inherently less safe or less reliable than the larger volume tanks. However, they can be...

what projectile are you trying to shoot? which barrel length, what are you trying to do. 100 on a .25 can obtain 900, but pretty low...

I'm retarded. for some reason i was thinking dynamic.

common mistake your hammer+spring can not generate enough power to open or keep the valve open long enough with that high plenum...