RoosterCogburn's latest activity
RoosterCogburn replied to the thread FX FX Wildcat MK3 leak (cannot be filled anymore).technically the pin and seat are the valve together. But yes. as for the picture, Its not metal to metal, The face ring is all that...- RoosterCogburn replied to the thread FX FX Wildcat MK3 leak (cannot be filled anymore).For air to pass the valve and exit the barrel it is impossible to have a proper seal. UNLESS there is a fracture in the gun body. Air...
- RoosterCogburn replied to the thread FX FX Wildcat MK3 leak (cannot be filled anymore).It’s probably safe to assume your valve is the issue. Replace it. Just the oring wasn’t the issue. Once again the valve can “look”...
- RoosterCogburn replied to the thread FX FX Wildcat MK3 leak (cannot be filled anymore).I assumed when you said it leaked from the fill port when you removed the probe. and that the reg gauge showed 0 it was only coming...
- RoosterCogburn replied to the thread FX FX Wildcat MK3 leak (cannot be filled anymore).A bad gauge or seized reg
- RoosterCogburn reacted to hgg2k's post in the thread FX FX Wildcat MK3 leak (cannot be filled anymore) with
Like. I replaced the valve seat o-ring and I reassembled everything. This time when I tried to fill it up, it went up to 150 bar, but the... - RoosterCogburn reacted to JaceSpace1369's post in the thread Underwater leak test, DON'T! with Like. I've seen several posts mentioning that dunking your air rifle or pcp underwater is okay if you do it quickly and dry everything...
- No, that is obviously an M10 fitting that screws into the compressor. Note the threads on one end and the barbs on the other. I would...
- Very true 🤣
- RoosterCogburn replied to the thread This hose made it exciting.I recommend we all stop living. Only way to not die. To hell with half measures, get out of your own house!
- Yikes…I mean put a bunch of pressure in and sometimes things go boom 💥. Shoot springers because of this? 🤣🤣🤣🤣🤣. We all better stop...
- RoosterCogburn replied to the thread This hose made it exciting.Didn’t load your pants? , I had a microbore explode at 4000+ psi. There were cat chew marks all over the hose where it blew on...
- RoosterCogburn replied to the thread What did you order / receive airgun related today? Thread.Brought the Katran L .177 up to 125Bar. Shooting .1775 15gr slugs at 883 and they’re single hole grouping at 25. I’ve got the 16.2...
- RoosterCogburn replied to the thread FX FX Wildcat MK3 leak (cannot be filled anymore).πες τους ότι είναι σπανακόπιτα κροατικής ή τουρκικής κατασκευής.
- RoosterCogburn reacted to hgg2k's post in the thread FX FX Wildcat MK3 leak (cannot be filled anymore) with Like. Αυτοί θα φάνε τήν σπανακόπιτα καί θα τό βρούνε! :ROFLMAO:
