rodjava's latest activity

That's just a reflection from the camera flash.

I specialize in 200 yards with all my pcp's. With perfect weather, I can split playing cards at 200 yards will all of my airguns.

The co-axial rest, I 3d printed it. It's mounted on a scissor jack Amazon. It works as well as a $2000 pro co-axial rest.

I am inviting any airgunner to shot with me at the Diablo Rod and Gun Club in Concord CA. I normally shoot every Wednesday from 9-12...

Some recent pics from latest range day with my .30 RP. Note the custom made charging handles in 2 sizes as well as the #2 regulator...

following

This is very good intel! Thank you. I swapped my gauge to the left side as well. The optional right angle adapter I installed makes it...

Sandy at airgundirect.com is a great guy. I purchased my Karma .30 Red Panda along with an Emperor moderator. His after sales...

I had no issues with the replacement threads on the Sekhmet gauges. For me, the #2 regulator gauge is the most important of the 3...

Also, do yourself a favor and notice how many seconds it takes for each shot to refresh. You might be in for a big surprise!

Here is my setup .30 cal slug All purchased at Sekhmet.com Outgun】Side-mount Adapter Angled Pressure Gauge Bracket for FX BRK...

3d printers have come a long way in 6 years. Now buy once, cry once with a Bambu X1c

https://www.printables.com/model/357855-mak-ammo-box-9x19mm-para-100pcs

This is great intel. Thank you. Im going to the range on Wed to give it a try.

Trucker, thanks for chiming in. Do you mean to max out the pressure from the tethered tank? It's set at 3100 psi and can go as high as...