rodjava's latest activity

Also, do yourself a favor and notice how many seconds it takes for each shot to refresh. You might be in for a big surprise!

Here is my setup .30 cal slug All purchased at Sekhmet.com Outgun】Side-mount Adapter Angled Pressure Gauge Bracket for FX BRK...

3d printers have come a long way in 6 years. Now buy once, cry once with a Bambu X1c

https://www.printables.com/model/357855-mak-ammo-box-9x19mm-para-100pcs

This is great intel. Thank you. Im going to the range on Wed to give it a try.

Trucker, thanks for chiming in. Do you mean to max out the pressure from the tethered tank? It's set at 3100 psi and can go as high as...

Any member with a .35 cal Karma Red Panda, plz show me your #1 regulator gauge? Karma indicates that the .35 cal Red Panda has an "wide...

The Karma Red Panda .35 cal with a slug tune has a "wide open" internal regulator. Where as the .30 cal slug tune has a 2800 psi #2...

I followed PJ's YouTube video instructions very carefully. I elected to turn the adjustment screw 2 1/2 revolutions in hopes that it...

Thank you everybody that chimed in. Yes, I just watched the PJ YouTube vid and it should be easy. I wonder what PJ meant by "wide...

I have the .30 cal Red Panda that was tuned for slugs directly from Karma. I shoot a 77 grain boat tail slug at 950 fps at 200 yards...

Revised July 24 2025 The 2 different Red Panda charging handles are now made from a special 3d printing filament. ASA-CF Engineered...

I can report that the 2 different charging handles I 3d printed for my Karma Red Panda worked out incredibly well! 3 inch - 70 grains...

I will be testing both sizes at the range today. If they both work out, I will make them available to the AGN membership at an...

Thanks for chiming in. There are some custom charging handles made from solid aluminum or brass. The next best is a 3d printed version...