Recent content by Robbie6

How much should the orings stick out of the magazine?

Still waiting on the number they have to give you to send something back. I decided to just take it apart and clean and debur everything.

Yeah, I'm not impressed with the customer service. I pulled the stock off and it's full of shavings. I'm gonna do a little fabrication on my own. I'd like to get rid of the plastic parts.

I took the stock off and found metal and plastic shavings all inside. I'm gonna clean it really good, file the burs and see what happens. I have the 50 cal Hammer, but that thing is so loud, it's hard to use in some of the places I shoot

Yes, I put a 2mm Allen wrench in the hole. I just did a half turn on the hammer spring. Nothing changed. I've read alot of other posts and people were pulling stuff apart and cleaning really good. I did a little bit of disassembling and I am seeing some metal and plastic shavings. I was trying...

Thanks, I will try that.

Ok, I have a Hatsan Bullboss 25, did a little adjustment on the hammer spring as suggested, no change. I cock the slide back and it's a 50/50 chance if the magazine rotates. And every couple times I cycle another pulled the gun goes off as I push the slide back forward. Do I just have a lemon?

I plan on contacting hatsan again tomorrow. Before it started acting up it was very consistent.

I have a Hatsan Bullboss .25. I shot it maybe 50 times. Now when I cock it the magazine doesn't rotate consistently. Sometimes when I cock it and push the bolt forward it fires. I use this for work, so I'd hate to have to send it back. Is there anyone having this issue and came up with a solution?