Recent content by RM.510bigbore

All you have to do is buy new completet Easton 2219 XX75 22 inch crossbow arrows ..Use a pair of pliers and remove the knock...it is easy they are not glued...That is it..They are the right size .. The Umarex Carbon Arrows will fail...The glue between carbon fiber and aluminum seperate...

The only problem with the Airsaber and Benjerman Airbow are states with hunting restrictions...They absoutley work..They are cheaper and much more reliable than crossbows.. I can't afford to buy a new crossbow every year or two with the limbs breaking..My last Barnett crossbow the limbs broke...

I just changed mine out twice on my .510 Texan.. Its pretty straight foward for the most part.. I had to reset my sear after putting the tube back in my Texan.. I have to work on my Texan a good bit so getting pretty familiar with it.. I suck at tech.. If you have any problems you can PM and Ill...

My gen 1 Regular Airsaber was $230.00 on cleanance..With a external regulator set to 3400 psi and Easton 2219 XX75 22 inch aluminum arrows 405 fps 474 grain with 100 grain point..Its pretty easy with no wind 3-6inch groups at 120 yards... Accuracy cant be improved too much...Also can use...

My Airforce Condor is half the size and weight of a FX Slug Slinger 700 -800mm barrel...Not any other .22 cal pcp going 1050fps with 40 grain slugs in a 17 inch barrel...Im so happy the short barrel shoots that fast...I need something lighter smaller.For the tractror..For the days when im using...

In my youth I had more money than brians.lol I burned through 1-2 Benchmark .224 barrels a year... Benchmark barrels didnt have a name then and were cheap $230.00 for countoured stainless blank..Everyone was great I bought at least 15-20 for myself and others..Now Benchmark Barrels still great...

Powder coating is worth it for me in Airguns...Leading is my number one problem with accuracy and slugs..Im using normal cheap production grade barrels..IF i were using American made custom double lapped barrels , lapped after reaming the barrel, and again after rifleing....Like Krieger...

It is real loud without moderator...Same power as 22lr...Same noise...With a Moderator 1.5inch diameter x 12 inchs tames its down very nicely.. Im waiting on the dony Fl talon P 1\2-20 moderator adaptor for the endcap...The differnt valves make different amounts of noise...The Doug noble valve...

My casting setup.. Have lee 20 lb pot hooked to PID Controller...

About $2.00 worth of pure lead and powder coating..A few hundred slugs....Beat tariffs... lol

I finally achived some accuracy with slugs and Airforce Condor.. I took the factory Airforce lother wather barrel with choke at 18 inchs and cut 1 inch off the muzzle end.. I hand lead lapped the barrel.. Its .221 in diameter... I got a mold from a .225 48 grain bowman mold decked down to a...

I finally achived some accuracy with slugs and Airforce Condor.. I took the factory Airforce lother wather barrel with choke at 18 inchs and cut 1 inch off the muzzle end.. I hand lead lapped the barrel.. Its .221 in diameter... I got a mold from a .225 48 grain bowman mold decked down to a...

My Airforce Texan .510 TX2 valve 820-840 fps with 450 grain slug..3-6 shots...Absoultley broke will not hold Point of Aim..Vector Veyron 6-24x44 SFP... It also did the same thing to a new Monstrum Challanger scope... I had on a coldshot mil adjustable base .. Im not cranking on turrets... My...

3 to 6 shots and not able to hold Point of Aim from 2 different chinese scopes isnt great.. $165.00 isnt free. My used Sightmark Wraith has lasted over the use of 300 lbs of one once slugs shot through.. I also bought a super cheap Simmions Pro Traget 4-12x40 like under $50.00 refurbshied...

I just bought a new Vector Veyron 6-24x44Ir SFP mil gid recticle..$167.00 on alliexpress.. I loved the recticle, the glass quality was good for the price.. It held up on my Airforce Condors..Not the same story with my .510 Texan 3-6 shots and it wrecked the scope..I got a new one under warranty...