Recent content by Rich_B

  1. Rich_B

    Huben PCP Progression - What was yours?

    Yes they are. I bought a refurbished one with an FX hand pump from Pyramid Air around 2002. That was my first pcp and it’s still holding air and very accurate.
  2. Rich_B

    FX Fx Maverick disappointed accuracy

    Also, you might want to try to increase the speed a little more for that pellet. I’ve had good results in the 900-950 fps range in several different rifles with that weight of pellet.
  3. Rich_B

    RTI RTI prophet l , Gage in the rear..

    I put my small SEKHMET gauge in there. Just make sure to use the appropriate size o ring in there and you’ll be good to go.
  4. Rich_B

    RTI RTI .22 P-2 rollcall

    Hajimoto has some videos out to adjust those regulators. If you’re going to use that one, he can help you.
  5. Rich_B

    A coyote eating the food I left for raccoons.

    When you’re ready to do the deed, open the door enough to shoot through a few hours before hand. just Have to think outside the box with these guys sometimes.
  6. Rich_B

    FX Utah Airguns tuning option question

    Or just buy an Eastern European gun.
  7. Rich_B

    .30 cal Fx hybrids going crazy…..

    A good scrubbing and a borescope will maybe help. Be careful though, I made the mistake of running a borescope down 3 of my .25 STX liners. What I found in my liners should be embarrassing for FX to have their name on.
  8. Rich_B

    FX Maverick Problem adjust hammer spring

    Sounds like you are over hammering the valve above 3. Screw the hammer screw most of the way in and do your quarter turn out, but set it on setting 7 each time you check the velocity. With 115 bar regulator pressure, those pellets should be going supersonic pretty easily.
  9. Rich_B

    Airgun Technologies sekhmet 28mm digital pressure gauge AGT Uragan 2

    Now, if someone could figure out how to get a reg gauge on them, that would be really cool.
  10. Rich_B

    FX M4 converted from MILD .22 pellet pusher to WILD .25 slug monster

    Make sure you keep an eye on the lead gathering in the liner. My most recent 3 .25 liners have a lot of voids in the steel that I found with a bore scope. Not apparent on the outside, but the inside looks like crap and they tend to grab lead like crazy. Like maybe FX got some bad steel from the...
  11. Rich_B

    FX How many rings…..

    5.23mmx2.62mm. I’m going to say there should be 3 in there from the FX drawing.
  12. Rich_B

    FX FX DRS custom 3 groove slug barrel

    That right there is about what I’m looking to do with the Wildcat. Great looking work.
  13. Rich_B

    FX FX DRS custom 3 groove slug barrel

    I would love to test a .25 in my Wildcat. The liner in it is full of voids from poor quality steel. FX should be embarrassed to have their name on this one.
  14. Rich_B

    Field testing Epoch Compact started

    Coyotes are still an option now. 😉