Recent content by redtrucker61

  1. R

    Benjamin Looking for 25 caliber marauder stock (almost) tune info

    Search for an article called marauder tuning by the A-team. Using the article as a guide I was able to get 32 shots out of mine. My sheet shows my tune starting at 770 going up to 795 then back down to 765 over 32 shots. I was looking for shot count.
  2. R

    How do you fill your PCP?

    Yong Heng pump. One on left was purchased in 2017. Put a new top end on it in 2022. Not sure how many actual hours are on it. Hour meter shows 17 but It was a couple of years old when I added the meter. I change the oil when it gets really dark. One on right was purchased in November of 23. New...
  3. R

    AUTHENTIC Yong Heng compressors!

    I have 2. The first one I purchased back in May of 2017 does not have the placard. That is is still chugging along. Had to replace the whole top end about 2 years ago but it still works. The new one I got back in November had the placard. New one has been giving some issues. Based on the date on...
  4. R

    GX-CS4 $529/$477 with discount code

    You guys really have me thinking about getting one of these. It would free up some floor space compared to my Yong Heng and the 30 gallon water tote I keep next to it. Would be using it to top off my 6.8L tank. This should last me a long time. I only get a chance to go out and shoot 1 or 2 times...
  5. R

    What’s your daily job?

    Currently a service writer for a company that sells and services commercial and homeowner zero turn mowers and other power equipment. Before that I worked for 30 years for large corporation that sells snack food, pet food and other products.
  6. R

    New Yong Heng question

    So I took apart the upper assembly this morning. I took some photos. Looks like this one sat somewhere for 2 years before I purchased by manufacture date. Maybe some one can tell me if they see any thing wrong. It didn’t seem tight as it turned over pretty easy.
  7. R

    New Yong Heng question

    So it looks like I am on my own on this. Seller has not responded to my second request for help or advice. If I have time I will try to take the top end off tomorrow to see if I find anything. I may just replace the whole upper assembly if I have to. I bought one before from white whale...
  8. R

    Pennsylvania Airgun show

    I got to put this on my calendar. I would like to go but would have to see if I could get that Saturday off from work. Carlisle is only about a 2 hour drive for me.
  9. R

    New Yong Heng question

    I did finally hear back from the seller. They asked about how much water and temperature of the water I am using and how fast it was heating. I replied but they have not yet read my reply. I almost positive it’s not a water issue or I would have had problems with the old unit. I use a 20 gallon...
  10. R

    New Yong Heng question

    No reply from seller yet. I checked water pump. I must have changed them and forgot. It’s the new pump in my 20 gallon water tote. It’s rated 600l/h. It’s flowing good. When cold there is less than a 1c difference between the 2 gauges. I emptied out my Benjamin tank just to try. I ran the new...
  11. R

    New Yong Heng question

    The very first time it ran I did the 10 to 15 minute break in under no pressure. Now I start it with both pressure releases open for a few seconds then close them and let it start to build pressure. I did reach out to seller yesterday for input. So far no reply. Not sure if I will get help on...
  12. R

    New Yong Heng question

    I’m still running the water pump from the old unit. I did check water flow. The water seems to be running through just as it did before. Due to work it will be a few days until I can play around with it again. I didn’t look at flow rating on the new water pump. I. Just put the new one in place...
  13. R

    New Yong Heng question

    I’m using the same circuit and water pump as the old unit. This new one is just not running like the old one did. I had filled my 6.8l bottle from empty doing 3 run and cool down periods with old one. I could run the old one for 10 to 20 minutes at a time for refills and it would never go above...
  14. R

    New Yong Heng question

    I recently bought a new Yong Heng. I was having trouble with my 5 year old one that I have since fixed. The new one seems to heat up very fast. Ran it for 10-15 minutes under no pressure. I then topped of my Benjamin bottle a couple of times. It was at .5 hours of run time so I changed the oil...
  15. R

    How many of you bought airguns at a physical store vs online?

    I have purchased all my air guns online. There was a Dunhams near where I lived when I was in Tennessee. They had some Hatsan and Crosman springer rifles next to their PB section. I only purchased a PB from them. Only other place I have seen airguns was Walmart.