rcs9250's latest activity

I used to use 1/8” fittings on my scuba flow bench. I am assuming your booster goes to at least 4,500 to maybe 5,000 psi. Go McMaster...

The OP’s parts are not the Swagelok VCR fitting. I welded hundreds of VCR fitting to tubing with an orbital welders when I worked at...

Probably nothing that I post.

What’s a budget if you can’t budge it

BINGO unqualified users is the best way to say it. My first choice of words was too harsh, I didn't think "smooth brains" was super...

In three years here on AGN IIRC, there was a Leshy tank on a gun that exploded, details were sketchy as I recall. And there may have...

You gotta be talking tenths (or maybe hundredths?) of grains. Cuz "10gr. +/- 13.43 gr." is a range of 3.43 gr. up to 23.43gr. And...

Some compressors already have a built in filter, some don't and the quality of them can differ significantly. I have a GX CS-4 that has...

Some folks will say that they run their home compressor in the basement of an air-conditioned house. Even with air conditioning, the...

A lot of people think black oxide or gun bluing is a rust preventer. For all practical purposes it’s an indoor coating. But even indoors...

And be advised, forum members have there own opinions and empirical results/proof of what works for them. How much moisture you need to...

I’m typically not a fan of 3D printed items but darn, you did a nice job. 👍👍

I 100% rely on empirical (DOPE) data from going to the range and shooting in 5 yard increments. Time consuming? Absolutely. But it’s...

All these digital levels with numbers looks impressive. Of course meant for people not struggling with reading glasses. But when you...

That’s going to be a toughy to find that adapter.