Recent content by rcpro88

Airforce claims the .308 Texan will shoot a 1" group at 100 yards out of the box. I would normally shoot 200 yards with the Texan, I would get anywhere from 4 inch - 6 inch groups at 200 yards with various types of pellets. I never really spent a lot of time shooting 100 yards with the Texan...

Why I think the Texan has a few hiccups: When you can't free float a barrel you use a heavy one. The .308 Texan barrel is supported in the center of the rifle with 2 bushings which allow the barrel to vibrate like a tuning fork when shot. The R&L shroud provides support to the end of the...

A few things I need to do are: 1. The retaining cup needs holes drilled to allow the set screws to prevent lateral impact movement. Simply pressing up against the titanium tube/aluminum retaining cup will not be sufficient. 2. Make the barrel tension nut separate from the muzzle brake or...

Starting from top to bottom, these are picture descriptions. 1. Split retaining ring - I made a ring made out of 316 stainless steel on my lathe with an OD of 0.8" and an ID of 0.60 and a thickness of .170". I cut a groove to match in the barrel. After I turned the ring on the lathe, I used a...