Ratzy's latest activity

Also not a problem. I put Teflon on a lot of my fittings.

Blue Thread Locker https://a.co/d/atdfh8u

Thanks for all the advice! I appreciate it. Low budget is not my #1 priority, but I'm not quite ready to jump into a $1.5k - $3K gun up...

I went ahead and degassed my Max 1 to see what threads were used for the tube to gun. Much to my surprise it appears to be m11x1.5 or...

Did you drill a hole in the air tube to corispone to the hole in the side of the reg? Reg need to be vented to the atmosphere pressure...

Well set it to 150 bar. But does the gun work without the regulator? First eliminate a mechanical problem with the gun. If the gun...

Does the gun work without the regulator? If it does then: The regulator goes in the tube with the numbers outwards. The pressure is...

I have an M60b from Wes that i put a carbon fiber bottle on, as well as a zelos that I also put a carbon fiber bottle on. On the zelos I...

Which Huma and for which rifle?

@Firewalker can be contacted by PM, you have 16 messages. Only need 10.

I have the 109.00 tuxing fiber glass bottle off Amazon on mine. Also have the hueban cricket bottle adapter with the regulator so I can...

No, nylon net. Like I said, doubt it will do much. https://a.co/d/b1LDRS8 The cable ties would be more effective than tie wraps. But...

Valve pins for the .30 and less 24" available at The Pellet Shop. .35 you're out of luck.

Yeah, I'd like to see about ordering another valve pin and some o-rings just to have them for the future. I haven't found anyone with...

Which is why I have various assortment kits of orings. I have a lot of guns using different orings so I try to cover the gamut...