Ranchibi's latest activity
Some baltic birch plywood, epoxy and elbow grease...- I am somewhat new here but I do not see many talking about shooting flies for targets. A number of years ago when Beeman was a name and...
- The trigger. Just felt terrible, but that is why I own what I do as well. Now there is a Daystate revere in the classifieds if you like...
- Check out FX Royale line (IF you can find one). I have the walnut Royale 500 (.25). Classic styling, incredibly smooth & accurate...
- I have a number of PCPs as well as springers. Good marksmanship needs to be developed and practiced regardless of what you shoot. I...
- Daystate electro guns such as the Air wolf, Red wolfs, Alpha & Delta Wolfs. These rifles operate with extremely low valve dwell but at...
- Ranchibi replied to the thread Quietest, and most accurate.Yes there is, ones with a baffeled shroud combined with a moderator that has baffels are going to be really silent. Not all PCP's come...
- I purchased the MOA version to try out based on Joe's review ( Cyclops) some time back.. I had read some people having issues with the...
- Ranchibi replied to the thread RAW Rapid LRT stock or chassis?.I purchased mine solely because of the Chassis that can be adjusted for my weird body dimensions and ergonomics....😂👍....RAW's wood...
- I made a squirrel feeder out of 3 inch PVC and screwed it to a tree about 50 yards from my patio where I normally shoot from. Well, the...
- Ranchibi reacted to Michael's post in the thread EDgun Often overlooked, but a really neat feature! with
Like. The entire power source (bottle, jets, valve, regulator, and almost all o-rings) are completely separate from the breach, barrel and... - Ranchibi replied to the thread Quietest, and most accurate.Accuracy with a springer takes a lot of practice, especially with hold. With PCP's it's usually on the shooter for pin point accuracy...
- Try BRIWAX .. in clear. While I still have a tin of TREWAX which a very similar product that's likely 40 years old, the evaporation...
- Drop that reg down to 80bar. And adjust the hammer, should get those crossmans running mid 900s.
- Ranchibi reacted to Normkel's post in the thread how to check the humidity at the output of hand pump ? with Like. Here's what I do: 1) Measure the ambient humidity using my lab hygrometer and or humidity gauge. 2) fill a bottle, tank, reservoir...