Recent content by Raja

There is screw that adjusts the hammer setting on the side and with shots fired it moves back I had to adjust and add threadlock to it .

What bar regulator is set at and is this velocity at max hammer level.

GQ buddy I think elevaton can be adjusted by putting shims under the rail.

Great tips jack . I tried the rail it allows adjustment from the back by adjusting the rail to the left from the back I got the scope almost centered . But the frount single nut stays at the same pisition . Will it shot right at multiple distances after doing this adjustment .

And the gun cost me $2600 with one barrel

I live I pakistan and the gun dealer got some fx guns from swiden .

The gun is shooting at same poi even with shroud removed

Just got a new fx impact in .22 cal . I also have a wildcat in .22 and bobcat in .25 . The gun is shooting to right I have to adjust the scope to extreme left to the end of clicks to zero the gun . I have tried different mounts and scopes but the result is same . Please if any body could help...

Kenskylight How did you polish the barrel . i have same issue after cleaning the barrel i get max 16 accurate shots . and my guns shroud is too tight could not open let me know how to open it . i remove the barrel to clean it every time . and do fx company help in any way . i live in...

I am still not happy with the gun it works good after the berral is fully clean and when i clean it i can see some shiny particals comming out . have tested the gun on chrony the velocities aa re pritty consistant so the problem is poor barrel . a friend of mine had a theoben and he had accuracy...

Thank you sir for reply my gun likes 18 grain more 16 g pellets go all over the target . the velocity with 16 g is 950 and with 18 grain it is 910 fps . It s velocities are very consistent. After cleaning the barrel i got better groupings . but the zero shifting problem is still there .

Hi every one i am new here recently got my self a fx wildcat in .22 . Its accuray is just fine some time half inch and some time less then that at 50 yard but it shifts zero after a while have changed scopes and have used more then 600 pellets . Any idea guys what to do with it .