Racing's latest activity

It took a bit of effort, but I finally found the right settings and velocity. I tried 920, 930, 940 FPS. The BC didn’t change much, but...

A .30 caliber is going to require A LOT of air. How are you going to fill it? You are going to need a tank and a compressor. Will have...

Just a quick update as i´m heading out.. Moved the sear point on the hammer them 3mm. Then used a to "mellow" hammer spring (on 1.25mm...

5 Shot group 100 meters with Sinner .223 and rws 41 grain slug 1060fps.

This is a .257 converted using a Boyd’s ATone stock, Cothran powerhouse valve plus more of Cothran goodies. Good for 150 fpe . Not much...

Even if you make that 2000$ it´s still a far cry from what these are running. AFAIK they´re still in market being sold to the general...

Right. So back to business, and.. issues. Took the stock hammer to the scale again and the thing comes all in at just shy of 21 grams...

I´ve got limited experience with the 100 and 110 but the little i´ve seen and shot them, there´snone the less a rather vast difference...

Have spent a few days working on this thing, or more to the point figuring it out. In doing so i believe i´ve got it to a point where...

On souping these things up. For the 25cal be aware that as you start getting into more serious porting on them for a 25cal you´ll sooner...

As someone that works on guns, i can´t but agree. Many that are though seems to be of British origins really? Got this old BSA R-10...

Here the Reximex Meta Premium, in 25cal. This one with the optional carbon fibre bottle. IMO a number of steps up on the ladder vs most...

Of course i did. Hatsan, for whatever reason, have come to restrict these at the barrel entry and the valve body fwiw. My critique is...

...and for the sake of argument, now i´ve got to handle the regulator too. Regulator creep galore... *sighs* Do NOT get yourself this...