Recent content by Powerage

You have a link ?

Changing barrel is not that difficult. Be aware that fx has used more locktight on the Panthera than past models . The gun has to be degassed. Then you remove the rail . Then unscrew the plenum . Then it’s one screw on the top and one on each side and it’s just to pull it out. If you have to...

I think the Panthera normally handles high pressure and reg. It’s more risky to dry fire or fire at low pressure with high hammer tension .

Looks like I managed to stop my slow leak trough the barrel . I still after two and half week haven’t been able to reach FX and they haven’t responded to my emails . I decided to try something. The bent valvepin i straightened out with some tools I had. That didn’t fix the leak. Then I...

I’m glad Utah Airgun was able to fix your Panthera . Here in Europe FX is not responding to my phone calls or mails . So I guess I’ll wait until someone gets the part in stock somewhere . Bagnall in uk was expecting this part in the near future. Cloudrider, your valve pin was already bent before...

In my case I didn’t run the tungsten. I had the reg at 150 then later 170. Barrel started to leak air that’s how I discovered the issue. Having hard time getting a replacement. In Europe fx doesn’t respond to retailers. One week now . Phones and email . No response . I’m living 4 hours drive...

Thanks for the replies . The gun isn’t dryfired without air . I know the consequences of doing that from my dreamline .. Sending the Panthera back … the dealer is far away and it would take months to get it back I’m afraid . The first weeks I had the Panthera set to shoot the 30 grain...

Looks like I found the reason . The valvepin is bent. Not sure why this happened. Now I have to get a replacement.

Okay so after the weekends shooting I discovered today the Panthera was without pressure . After filling I can hear a hiss through the barrel. I’m suspecting the valve not closing properly. Tried to dry fire a few shots didn’t solve the problem . did anyone else have this problem ? Is there any...

Hi everyone. Received my Panthera last week and today I experienced that the safety is not working properly. Is there any adjustments with the trigger like on the impact to fix it ?

I tried to PM the user Daft Lad about this post. Maybe he reply’s

What adapter I have to get to fit the picatinny bipod to a fx Panthera ?

Did anyone try the FX - Edgun barrel adapter. I see huma air and Donny has it in stock . How is the accuracy ? I have plenty of spear barrels for my fx guns . Would like to try with the L2 . 

the ball in the slug power kit ? 

Thank for the reply’s . I did a quick check on the alignment of the pellet probe . And it looks like it was missing 1 mm to be completely in place. I took the gun apart an made one counter clockwise turn on the rod. Looks like it’s now aligned much better and it doesn’t conflict with the...