Recent content by Phil18

WOW!! Finally got the Marauder depressurize,the suggestion on the bleeding using the pump worked great i hooked the pump up and pump it until the valve open and the cylinder started to take pressure again,i stop grab the old mechanic stethoscope and as suggested opened the pump bleeder very...

 Thanks!! Dairyboy it sure sounds like it could work and i will give this idea a try..

Dartagnan Just a quick update i was able to remove completely the regulator gauge ( and installed it back again) with unfortunately no positive results,i was hoping for some sort of small leakage into the regulator but this is a total pressure blockage from the filler tank to the regulator.It...

Thanks Dartagnan this is a scenario that to other airgunners though probably extremely rare it can happen ( due to a defective part or installers fault they would not know until rifle is pressurize i am guessing that this is where the vented regulator may be a better option ) i am just surprise...

Thank you addertooth i really appreciate that you're trying to assist me with this problem,unfortunately i am located in North Carolina,i don't hunt anymore but i really like Plinking.I am sure that i will find a SAFE solution to this problem,as a retired industrial maintenance mechanic i am...

Thanks for your prompt reply,i will try to gently tapping on the side of the regulator and see if it recovers and i get lucky,in any case i will be in touch with HUMA to see if they may have other suggestions.I do understand that this is a VERY serious and dangerous issue that needs to be...

I could really use some help with this one since i believe that it has become a dangerous issue. I have installed a HUMA regulator supposedly set to 130 Bar with the OEM gauge in my Marauder with no leaks or problems during the install it was straight forward following the directions. My problem...