Recent content by pcptunes

We have done the changes to our regulator so even if the plenum (output pressure) is manually changed and overshoots the max pressure of the tank which for our regulators is 300 bar it is capable to handle that. Still the max working regulated pressure must never be set beyond 200 bar and input...

Have not been on forums as we have been extremely busy with new designs and customisation on newer products. First of all we would like to say that it was a very heart breaking to hear about the failure and we are thankful to god that no harm was caused to David. We acknowledge that this was a...


Yup, 1/8 BSP is correct

Just like ken wrote, most micro gauges we have tried and tested do read higher or lower, very few would be a exact match. When tested against larger wika gauges, micro gauges could read in difference of +/-10bar. We were surprised to see some of the walther dominator 1250 gauges read in...

Nice vid Michael. We did tune up the power on these to 940 fps with the 81.2 jsb's. We get around 7 shots before the reg trips. Perfect for the taste, one mag can do a great job in the field. Its now a guzzler for air and so would any of the other big bores be. Got to do a field test to share...

When we tune or make kits for airguns we ensure all components can withstand the max pressure you intend to use your airgun.You point is valid about the regulated output to the tubes working pressure, but we need to look at the regulator failing completely and allowing that 3600 psi to get...

Working pressure 1.5 times, deform and burst is way above my friend. I still don't recommend the mod with the existing tube. Good Luck with the mod anyways...

My 2 cents, even if you have a regulator, all parts must be rated to 1.5 times the max air pressure you intend to use it for (in this case the airtube containing the valve) is your weak point. You got to take into consideration the failure point of the regulator as well.

Hi Folks, this is Paul here and have been in love with airguns from my young days. Those days, all I had access were to Springer's and had never ever heard of a pcp. Thanks to the world wide web where info started pouring in as time passed. Bought my first pcp 10 years back and have been...