Pale_Rider's latest activity
Both suggestions are good. On a CRX I changed from 18 to 11 ft lb, I had the vision of lightening the hs and poppet return spring to...- Pale_Rider replied to the thread Huben Huben gk1 degassing advise.I don’t have a Huma reg on my GK1 but I cant see how it would delete the brass screw for the indexing. You are confusing it with the...
- Pale_Rider replied to the thread Huben Huben gk1 degassing advise.There’s another option: Underneath the mag loader is a brass screw. Turn it counter clockwise slowly until it starts to release air...
- Pale_Rider reacted to Airgun-Revisions's post in the thread New Crosman breech kit from Airgun Revisions with
Like. Crosman steel breech kits from Airgun Revisions is an upgrade to the standard 2240SBPK kit and it is now a Multi-fit application... - Out killing cans with the MK2
- Zeroed and shot this a little today. Pistol is very accurate with 7.0 Meisters I tried today. How my eyes do with this rear notch...
- Nope I am a all or nothing type of guy…target set to the fence @ 27.5 yards…pistol sights remain the same..set for 10 meters..I use a...
- What Razor62 said. Diana Eleven, Two-forty, Two-Fifty and Two-Sixty are Chinese springers upgraded some and QC'd more than most. So, if...
- All Benjamin Airbow and Bulldog models have been marked down from MAP. Huge savings across the board on all large game models. Visit...
- Pale_Rider reacted to sb327's post in the thread Huben K1 - Is there a way to repair or re-calibrate the tank gauge? [Solved] with Like. The k1 uses a different gauge than what is common. It is pushed into a groove and slid sideways to install. A small oring provides the...
- Pale_Rider reacted to john8's post in the thread Huben K1 - Is there a way to repair or re-calibrate the tank gauge? [Solved] with Like. Caution! When removing the gauge beware of small spring and detent balls. I've a few floating around the shop somewhere. Did you ask...
- Pale_Rider reacted to grouch-o's post in the thread Huben K1 - Is there a way to repair or re-calibrate the tank gauge? [Solved] with Like. thank you for sharing. much appreciated. (got it off. waiting for a spare part.)
- I have always been rather dismissive of trying to turn a pistol into a rifle (just get a rifle!) but my mind has shifted a little after...
- Hi guy’s it’s a beautiful day here in the Northeastern corner US…I Love ❤️ all this High Tec…Precision Made…Exotic ..One off Builds..and...
- Almost done with the parts gun project …Crosman 38 T/C…just waiting on a roller…it was the sear spring that I couldn’t find anywhere…so...
