Pachangibiri1's latest activity
- PPachangibiri1 replied to the thread Huben Wondering if I can fill a Huben GK1 SHORTY with a 12 volt pcp 4500 psi clunker compressor to 5000psi.. Im having a hard time finding a 5k compressor.Got me confused. I’m a 65 yr old man that weighs 135lbs when wet!!! I ain’t no Superman.
- PPachangibiri1 replied to the thread Huben Wondering if I can fill a Huben GK1 SHORTY with a 12 volt pcp 4500 psi clunker compressor to 5000psi.. Im having a hard time finding a 5k compressor.I don’t think I’ll be heavy enough to push the pump down with that much pressure. It gets very hard when it’s that much presure
- PPachangibiri1 replied to the thread Underwater leak test, DON'T!.I’ll probably dunk it too, if I had a leak that was driving me crazy.
- PI did it, years ago as a last resort with an Impact... I was definitely very nervous!! I just couldn't find the leak, so at the advice...
- PNo worries from me. Only concern that your gun may not last long if it is doing it.
- PNo worries from me, either. Surmised what had happened, knew forum doesn't condone but also realized it was unintentional, so you live...
- PPachangibiri1 replied to the thread Underwater leak test, DON'T!.Antifreeze with water maybe!!! The antifreeze is not supposed to let it rust
- PI posted something that happened to me with my Airhawk2, and the discussion went sideways quick. It turned into a discussion of...
- PPachangibiri1 reacted to psycho62's post in the thread Huben Wondering if I can fill a Huben GK1 SHORTY with a 12 volt pcp 4500 psi clunker compressor to 5000psi.. Im having a hard time finding a 5k compressor with
Like. Absolutely brother. I been here a few years now and ive had tons of good dudes help me out. Im no expert even after 50 years of airguns... - PPachangibiri1 reacted to Devink's post in the thread Huben Wondering if I can fill a Huben GK1 SHORTY with a 12 volt pcp 4500 psi clunker compressor to 5000psi.. Im having a hard time finding a 5k compressor with Like. I would personally stay away from trying to go to 5000psi on your tanks and just use a compressor that is meant for 5000+ psi to top off...
- PPachangibiri1 reacted to rdtricks's post in the thread Huben Wondering if I can fill a Huben GK1 SHORTY with a 12 volt pcp 4500 psi clunker compressor to 5000psi.. Im having a hard time finding a 5k compressor with Like. Most "clunky" compressors will push to 300 Bar/ 4500 psi. Because of their design, clunky, they will not last long when being pushed to...